Specifications:
MAX.POWER: 120W
VSWR: 1.00~19.9
FREQUENCY RANGE VHF(145mhz) / UHF(435mhz)
COVER:100mhz~500mhz
INSERTION LOSS : < 0.15dB(VHF) , < 0.25dB(UHF)
TEMPERATURE : 0℃~70℃
BATTERY :3 x AAA Type Battery , <3mA ( light off )(battery not included in this sale)
SZIE: 66 x 68 x 37 (mm)
INTERFACE :N(L16)
WEIGHT: < 260g (without battery)
Instructions:
Battery installation: Remove 4 black round screws on the corner of back cover and open it. Install 3 AAA batteries. BE CAUTIOUS to the polarities. Put the cover on and fasten the screws. IMPROPER INSTALLATION OF BACK COVER WILL CAUSE ERROR ON U-BAND MEASUREMENT!
Connect the Output of your transceiver to \"TX\" and Antenna or Load to \"ANT\". NOTE: UV-Band meter utilize \"N\" type connectors; and\"SL16\" connectors (normally named \"M\" connecter) for HF-Band. Proper adaptor/cable is required if your device has different type of connectors.
Press the red button to power on. After 2 seconds of LCD self test, it\'s ready for normal measurement.UV-Band meter will display in sequence:\"+ XXX P\" (pass through power),\"- XXX P\" (feed back power),\" XXX Γ\" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display.
Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off.
8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.
새것입니다
10만원,,,,,송료착불
필요하신분은 송금후 주소지 문자로 넣어주세요
국민은행,,,,802-21-0662-338,,,,,,서상철
MMS 는 수신안되니
쪽지나 메일로 남기시구요 hl1tlq78@gmail.com
