탄노이 미니오토그라프 스피커 입니다.
현악에 질감을 탁월한 탄노이 북쉘프 스피커 입니다.
상태 민트급 수준에 신동품 입니다.
165만원 판매 합니다.(전국택배가능)
010-2300-0772 / 031-254-0772 입니다.
불후의 명기인 Tannoy 오토그래프가 초소형 미니로 재탄생. 4인치 동축 드라이버 유닛 안에 담겨진 놀라운 사운드(네추럴한 중역, 절제된 저음, 54kHz에 달하는 주파수 응답)
PRODUCT INFORMATION
PERFORMANCE
Recommended amplifier power 20-100 Watts RMS
Power Rating 50W RMS, 200W peak
Maximum SPL 105dB at 1 metre for 50W RMS, 111dB at 1 metre for 200W peak
Total harmonic distortion Less than 2% at 50W RMS (100Hz to 20kHz)
Minimum Impedance 5.5 ohm
Continuous power handling 95 Watts RMS
Sensitivity (2.83V @ 1m) 88dB
Nominal impedance 80hms
Frequency response 68Hz- 54kHz
DRIVE UNITS
Dual Concentric Driver LF 100mm (4”) mixed fibre pulp cone, HF 19mm (3/4”) titanium dome with neodymium magnet system
Dispersion 90 degrees conical
CROSSOVER
Crossover frequency 2.3kHz mid to high
Crossover type 2nd order compensated low pass, 1st order compensated high pass
CONSTRUCTION
Enclosure type Ported
Cabinet construction High density birch ply, 10 and 13mm thick
Volume 48L (11 1/16 cu.ft)
Weight 4.0kgs (8.8lbs)
Cabinet dimensions (H x W x D) 345mm x 210mm x 130mm (13 9/16” x 8 1/4” x 5 1/8”)
Cabinet volume 3.5L (0.0124cu.ft)
현악에 질감을 탁월한 탄노이 북쉘프 스피커 입니다.
상태 민트급 수준에 신동품 입니다.
165만원 판매 합니다.(전국택배가능)
010-2300-0772 / 031-254-0772 입니다.
불후의 명기인 Tannoy 오토그래프가 초소형 미니로 재탄생. 4인치 동축 드라이버 유닛 안에 담겨진 놀라운 사운드(네추럴한 중역, 절제된 저음, 54kHz에 달하는 주파수 응답)
PRODUCT INFORMATION
PERFORMANCE
Recommended amplifier power 20-100 Watts RMS
Power Rating 50W RMS, 200W peak
Maximum SPL 105dB at 1 metre for 50W RMS, 111dB at 1 metre for 200W peak
Total harmonic distortion Less than 2% at 50W RMS (100Hz to 20kHz)
Minimum Impedance 5.5 ohm
Continuous power handling 95 Watts RMS
Sensitivity (2.83V @ 1m) 88dB
Nominal impedance 80hms
Frequency response 68Hz- 54kHz
DRIVE UNITS
Dual Concentric Driver LF 100mm (4”) mixed fibre pulp cone, HF 19mm (3/4”) titanium dome with neodymium magnet system
Dispersion 90 degrees conical
CROSSOVER
Crossover frequency 2.3kHz mid to high
Crossover type 2nd order compensated low pass, 1st order compensated high pass
CONSTRUCTION
Enclosure type Ported
Cabinet construction High density birch ply, 10 and 13mm thick
Volume 48L (11 1/16 cu.ft)
Weight 4.0kgs (8.8lbs)
Cabinet dimensions (H x W x D) 345mm x 210mm x 130mm (13 9/16” x 8 1/4” x 5 1/8”)
Cabinet volume 3.5L (0.0124cu.ft)
