KP-07M
다이캐스트 알루미늄 프레임과 건메탈 앰방을 사용합니다
암 모터 및 턴테이블은 다이캐스트 알루미늄 프레임에 단단히 접착되어 있으며 철저한 진동 방지 조치가 특징입니다.
알루미늄 합금 턴테이블의 무게는 2.5kg이고 회전 토크는 1.5kg/cm입니다.
석영 잠금 고정밀 모터는 0.01%의 와우 플러터를 제공합니다.
모터 부품은 Kenwood에서 제작하지만
다른 부품은 Micro Seiki 에서 제작 하였읍니다
암대는 공진을 억제하기 가장 쉬운 스트레이트 타입을 사용하고 있습니다.
헤드쉘은 알루미늄 합금으로 만든 특수 제품
Type | Auto-up DD Turntable |
Phono Motor Section | |
Drive system | Direct drive |
Motor | Quartz rock |
Starting torque | 1.5 kg / cm |
Turntable | 30 cm, 2.5 kg Aluminum Die-cast |
Moment of inertia | 400 kg / cm2(Including Rubber Sheet) |
Number of revolutions | 33 1/3, 45 rpm |
Wow and flutter | 0.01% (FG direct reading method) |
Signal-to-noise ratio | 80dB(DIN-B) |
Cartridge Section | |
Type | Moving Magnet System, V-70 |
Compliance | 7x10-6cm/dyne |
Proper needle pressure | 1.5g |
Exchange needle | N-70 |
Output voltage | 2.5 mv (1 khz, 5cm/s) |
Tone Arm Section | |
Type | Static balance system |
Effective arm length | 222mm |
Overhang | 15mm |
Tracking error | + 3.2 ° ~ -1.3 ° |
Needle pressure variable range | 0 ~ 3.0g (0.1g step) |
Applicable Cartridge Weight | 4 ~ 12g (when using the attached shell) |
<General> | |
Attachment mechanism | Contactless optical detection auto-up mechanism Static type anti-skating mechanism Tone arm height adjustment mechanism |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption (Electrical Appliance and Material Control Law) | 18W |
External dimensions | Width 390x Height 145x Depth 370 mm |
Weight | 8.7kg |
달려있는 오토폰 카드리지 드림니다
작동 잘됨니다
130만원---> 100만원
010-5247-3939 서울 양재동