SANYO MCO-20AIC CO2 INCUBATOR CO2인큐베이터

SANYO MCO-20AIC CO2 INCUBATOR CO2인큐베이터
상태양호

제품명 : SANYO CO2 Incubator MCO-20AIC CO2 인큐베이터 215리터
외부치수 : W770 x D708 x H900 mm
내부치수 : W620 x D523 x H665 mm
용량 : 215리터
Temp. range : +5°C ~ 50°C

 

Exterior (W x D x H)	770 x 708 x 900 mm
Interior (W x D x H)	620 x 532 x 665 mm
Effective capacity	215 litres
Net Weight	195 kg
Exterior finish	Polyester finished, baked-on zinc galvanized steel
Interior finish	Copper-enriched stainless steel
Outer doors	PMMA/PVC with intergrated door heater
Inner doors	1, tempered glass
Shelves	5, max. 15
max. load/shelf	5kg
Access ports	1, backside Ø 30 mm
Cabinet Insulation	Rigid foam polyurethane
Heating system	Direct Heat & Air jacket
Temperature controler	Microprocessor PID thermistor sensor
Temperature range	+5°C above AT to 50°C (in a 5°C to 35°C AT)
Temperature uniformity	+/- 0,25°C*
Temperature controllability	+/- 0,1°C*
CO2 control system	On-off control
CO2 range	0 to 20%
CO2 controllabolity	+/- 0,15%*
CO2 sensor	Infrared
Humididication method	Natural evaporation with humidifying pan
Relative humidity	95 +/- 5% RH
Water level sensor	yes
Interior Surface	Standard InCu saFe® Copper Enriched Stainless Steel
UV lamp	SafeCell UV system
Hi/low temperature	yes
CO2 level	yes
Door failure	yes
UV lamp failure	yes
Low water	yes
Independent overheat protection	yes
Remote alarm contact	30V DC, 2A allowable

 

 

각종실험장비 중고장비구입은 믿을 수 있는 곳에서 구입하십시오

한국과학상사는 중고장비 전문점 입니다

한국과학상사

연락처 010-5354-6248

e-mail ksc@koreasc.co.kr